Ruby UK Ellumiere T-Piece Connector

When you buy Ellumiere lights from us, you will need a T-Piece connector which will split the cable and join up the other lights in the same system. However, the last light in the sequence does not need a T-Piece connector. So for example, if you were to buy 5 lights, you would need 4 T-Pieces to join all the lights together and bring the cable back to the power source.

As part of the ‘CONNEXT’ system, this T-Piece connector will attach itself to any of the other related products within the same system. The perfect kit to lighting up your pathways, gardens and decking. To help create the perfect fully functioning lighting system, follow these simple steps:

 1. Choose your lights (Max qty. 12)

Choose from small spotlights or larger spotlights with both creating lovely designs when lighting up flowers, plants and bushes. Then our deck lights create the perfect feature, running along the decking edges brightening up your design and outdoor spaces. The final option is Bollard lights which are perfect for pathways and driveways.

2. Choose your selector and cables (T-piece with every light except the last one).

Once you have decided on your lights and where you are placing them, you need to work out your cables and how much you will need. Measure the distance between each light and then back to the power source and from the power supply to the first light in the sequence. A T-Piece connector will be needed for every light except from your last one in the sequence. Measure the total distance making sure it does not exceed 50 metres. 

3. Grab your transformer, and then set the system up by just plugging it in. 

Now its time to connect everything up and together, sit back and enjoy your new lighting system.